What Is The Process Of Water Purification?


There are a number of different ways to create pure water from water that comes from natural sources or indeed, water that emanates from human drainage systems. The most common water purification in Lincoln, NE is when water is extracted from a constant source and mechanically enhanced by removing all the physical impurities. Once the physical impurities have been removed from the source water and any harmful bacteria or organisms in the water have been destroyed the water is safe for human consumption.

The process of water purification begins when water is taken from the source, this can be a river, lake or a sewer system. The water is first sent to huge holding tanks where it is allowed to sit motionless for long enough for much of the suspended material to be separated as it sinks to the bottom of the tank.

Once the initial separation process has been completed the water moves on to the actual purification process. It moves from the holding tank to another tank where large physical objects are removed, not sediment. At this stage the pH of the water is adjusted to within specific limits and sodium carbonate is put into the water, this begins a reaction that results in calcium carbonate.From here the water moves to areas where the water is disinfected. As it moves from the second holding tank and heads to the area where water purification in Lincoln, NE takes place, harmful microbes are destroyed. In the past the destruction of the microbes was done with chlorine, today much of the purification process is done using hydrogen peroxide, UV light and ozone.

At this stage the water is still not purified, it must be subjected to a process called flocculation. Based on the original source of the water and the location of the purification plant tiny particles are added to the water. These tiny particles are attracted to one another and many of the common impurities found in water. These particles eventually form small balls of impure material; this water then flows to another tank where the little balls settle on the bottom.

The final stage of the purification process is active filtering. Many different filtering methods exist but the most common is to force the water through a bed of sand. Once filtration is complete the water is fit for human consumption and is piped to the consumer through the municipal water distribution system.

Dissolved mineral salts, excessive chorine and even bacteria can still remain in the municipal water when it arrives in your home and further water purification in Lincoln, NE will improve the taste and odor. You are invited to contact Futuramic’s Clean Water Center to learn more about their reverse osmosis and UV sterilization systems.

What Is The Process Of Water Purification?